VTP, VTC, VTM, VTA, VTG — Vertical Turbine Electric Pump Family

Design features

The pump body consisting of impellers and diffusers is designed to provide heads and flows required for a system with the highest efficiency. The VTP electric pumps can be multistage that increases their universality both when selecting an electric pump and when electric pump modification is required to increase its capacity. During operation the pump body is completely submerged in water that allows pump start without preliminary filling.

Wide range of materials allows selection of a suitable electric pump for the most severe operation conditions. All models of VTP electric pumps conform to safety, efficiency and reliability requirements, and minimum maintenance costs requirements as well.

VTC, VTG vertical turbine electric pumps

Technical parameters

• Flow up to 4000 m3/h
• Head up to 380 m
• Temperature up to 200оС 

Design features

1. An outlet nozzle with internal diameter of 10” or more. They are used for pumping high temperature fluids
2. Application of a shaft with external washing pipe used for operation with abrasive medium is provided
3. A convenient column section centering system and simple assembly of a transmission shaft reduce costs for installation, simplify maintenance and reduce out-of-service times
4. Transmission shaft of AISI416 steel. A sleeve coupling ensure rigid connection of two shafts
5. Various materials for sleeve bearings are available
6. Removable shaft sleeves or hard facing provides its long-term service
7. Dual wear rings for impellers and diffusers. Wear surfaces with hard facing are available for ensuring long-term service. Wear rings can be washed in case of particulates in fluid

VTM, VTG vertical turbine electric pumps

Technical parameters

• Flow up to 25 000 m3/h
• Head up to 70 m 

Design advantages

1. An optimal design of the diffuser and impeller ensures maximum efficiency. A semi-open or shrouded impeller with or without wear rings is used
2. Transmission shaft of AISI416 steel. Transmission shaft coupling of all sizes is available for easy maintenance. A design with a shaft protected by washing pipe is available
3. Various materials for sleeve bearings are used according to operational conditions
4. A sleeve coupling closed by seal rings ensures stainlessness
5. The shaft has internal opening for washing of the sleeve bearing of the pump body
6. The adaptable design for application in systems with a pressure branch pipe installation above surface (surface flow) and with a pressure branch pipe installation below surface (underground flow)

VTA vertical turbine electric pumps 

Technical parameters

• Flow up to 20 000 m3/h
• Head up to 12 m 

Design features

1. A single-stage electric pump with axial impeller with self-cleaning blades
2. Application of a shaft with external washing pipe used for operation with abrasive medium is provided
3. A wide range of hydraulic characteristics ensures the best selection of the electric pump for the relevant operational conditions
4. Transmission shaft of AISI416 steel. A sleeve coupling consisting with a joint coupling, lock rings and seal rings rigidly connects two shafts and is corrosion protected.
5. Bearings of various materials can be used according to operational conditions
6. A wide range of materials for pump body which are corrosion resistant and abrasion resistant
7. The adaptable design for application in systems with a pressure branch pipe installation above surface (surface flow) and with a pressure branch pipe installation below surface (underground flow)

Thrust bearing assembly

In case of vertical motor with solid shaft - driven VTP electric pump, the thrust load will be born by the thrust bearing at the upper part of the electric pump or the thrust bearing in the motor. Two types of bearing assemblies can be supplied for high or low thrust load.